BTD 10G is a DUAL Full Outdoor and Full Duplex microwave link for the free 10,3 - 10,6 GHz band. The SUMMIT DEVELOPMENT dual radio technology uses two SW radios in one hardware (from the Ethernet port, both radios are viewed as one radio!).

Compared to the classical 10 GHz PtP technology, BTD allows the transfer of double capacity and offers longer radio distance. In addition, one of these SW radios can be turned off at any time. The configuration settings of the radio allow much more variable use of the frequency band when compared to traditional radios.

  • Software Defined Radio SUMMIT DEVELOPMENT (own modem)
  • Transmission capacity up to 715 Mbps Full Duplex
  • Modulation 4 to 256 QAM with ACM in both versions
  • In case of failure automatically switches to a backup link
  • Channel size from 3,5 to 84 MHz (or 2 x 56 MHz)
  • FEC (Reed Solomon, Interleaving)
  • 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
  • Jumbo packet transfer of MTU size up to 11 000 bytes
  • Security and Access management, digitally encrypted transmitter
  • Advanced QoS Port-based and Bandwidth control Management
  • Optimal solution for Triple Play services with IPTV support
  • Support IEEE 802.1Q VLAN (also QinQ)
  • Support packet-flow control acc. to IEEE 802.3x
  • Power supply via Ethernet cable acc. to IEEE 802.3at
  • Power supply via separate cable (DC input  20 to 57V)
  • Automatic switching to backup power supply ( PoE1, PoE2, PWR)
  • Built-in spectral analyzer for searching for free channel
  • Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
  • Configuration of radio link in Windows, Linux, Android, iOS
  • Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
  • Monitoring of device parameters in real time (input voltage, current, power …)
  • Automatic detection of radio polarization
  • Direct installation of parabolic antenna


High quality
High power
Full Outdoor
Channel size
Finely tuning
Asymmetric Bandwidth
Easy installation




General RF 
Frequency band10,3 - 10,6 GHz
Channel size of one radio3,5 MHz to 84 MHz
Channel size of two radios2 x 3,5 MHz to 2 x 56 MHz
Asymmetric BandwidthYES
FECReed-Solomon, Interleaving
Frequency stability± 5 ppm
Output power TX (one radio)-23 to  +10 dBm (± 1 dB) *
Output power TX (two radios)2 x -23 to 2 x 7 dBm (± 1 dB) **
APC (Aurom. Power Control)YES
Regulation APC by RSSIYES
* +8 dBm with modulation 256 QAM
* +9 dBm with modulation 64 QAM, 128 QAM
** +5 dBm with modulation 256 QAM
** +6 dBm with modulation 64 QAM, 128 QAM
Transmission rate
(2 x 56 MHz channel)
Capacity of radio [Mbps]ModulationSensitivity for
BER 10-6 [dBm]
715256 QAM-61
626128 QAM-64
53664 QAM-67
44732 QAM-70
35716 QAM-74
2688 QAM-75
1794 QAM-81
Transmission rate
(1 x 84 MHz channel)
Capacity of radio [Mbps]ModulationSensitivity for
BER 10-6 [dBm]
592256 QAM-60
518128 QAM-63
44464 QAM-66
37032 QAM-69
29616 QAM-72
2228 QAM-73
1484 QAM-80
TypeDiameter [cm]Gain [dBi]
ANT 10B35-C33529,4
ANT 10B65-C36535
ANT 10A90-C29037,8
ANT 10A120-C212040,2
User interface
Eth1,Eth22 x 10/100/1000 Base-T
SFP1, SFP22 x 1000Base-SX / 1000Base-LX
GUISMS (Windows, Linux-Wine)
MUISMS (Android, iOS)
WUISMS (Web browser, read-only)
Mechanical conceptFull Outdoor
Dimension145 mm x 240 mm x 240 mm
Weight3,5 kg
Power supply / cable 
Power Over EthernetIEEE 802.3at (PoE+)
Separate DC power supply20-57 VDC
Power consumptionup to 30 W
Ethernet cable OutdoorFTP CAT5e to 100 m
Operational temperature-20°C to 50°C
Ingress protectionIP-67
IEEE 802.31000 Base-TX, 1000 Base-T
IEEE 802.3azEnergy Efficient Ethernet
IEEE 802.3xFlow Control
IEEE 802.1qVLAN tagging, QinQ
IEEE 802.3uAuto-Negotiation protocol
IEEE 802.3atPower Over Ethernet plus


  • ANT 10B35-C3
    10,3 - 10,6 GHz
    Diameter 35 cm
    Gain 29,4 dBi
    Weight 2,5 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 10B65-C3
    10,3 - 10,6 GHz
    Diameter 65 cm
    Gain 35 dBi
    Weight 7,5 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 10A90-C2
    10,3 - 10,6 GHz
    Diameter 90 cm
    Gain 37,8 dBi
    Weight 19 kg
    Compliance ETSI EN 302 217 Class2
  • ANT 10A120-C2
    10,3 - 10,6 GHz
    Diameter 120 cm
    Gain 40,2 dBi
    Weight 35 kg
    Compliance ETSI EN 302 217 Class2



  • SET 1

    (for Eth1, Eth2, PWR)
    SET structure:
    1x output
    2x rubber seal

  • SET 2

    (for SFP1, SFP2)
    SET structure:
    1x output
    3x rubber seal

  • PLUG

    (for Eth1, Eth2, SFP1, SFP2, PWR)
    Plug structure:
    1x plug
    1x rubber "O" ring

We use cookies to personalize content and ads, provide social media functions and analyze our traffic. We share information about how you use our site with our social media, advertising and analytics partners. Show details.