BT 17G v2 UNI

840 Mbps

STRONG

BT 17G v2 UNI is a Full-Duplex microwave link operating in the 17 GHz license-free band. The radio can provide up to 840 Mbps throughput using 128 QAM modulation and 140 MHz bandwidth. The Radio also includes advanced Ethernet settings.

It is designed as a Full Outdoor Unit (one universal unit) with direct mounting to a parabolic antenna. The Link uses crosspolarization connection, therefore one side of the link must be installed in vertical polarization and the other side in horizontal polarization.
These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows the radio link to be used in very difficult climatic conditions.
  • Software Defined Radio SUMMIT DEVELOMPENT (own modem)
  • Transmission capacity up to 843 Mbps full duplex
  • One universal unit (for both sides of link)
  • In case of failure automatically switches to a backup link
  • Cross-polarization connection of radio
  • FEC (Reed Solomon, Interleaving)
  • 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
  • Jumbo packet transfer of MTU size up to 2000 bytes
  • Security and Access management, digitally encrypted transmitter
  • Advanced QoS Port-based and Bandwidth control Management
  • Optimal solution for Triple Play services with IPTV support
  • Support IEEE 802.1Q VLAN (also QinQ)
  • Support packet-flow control acc. to IEEE 802.3x
  • Power supply via Ethernet cable acc. to IEEE 802.3at
  • Power supply via separate cable (DC input  20 to 57V)
  • Automatic switching to backup power supply ( PoE1, PoE2, PWR)
  • Built-in spectral analyzer for searching for free channel
  • Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
  • Configuration of radio link in Windows, Linux, Android, iOS
  • Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
  • Monitoring of device parameters in real time (input voltage, current, power …)
  • Automatic detection of radio polarization
  • Direct installation of parabolic antenna

Benefits

High quality
High power
Full Outdoor
Channel size
Finely tuning
Latency
Asymmetric Bandwidth
Easy installation

Specifications

BT 17G v2 UNI

840 Mbps

General RF
Frequency band17,1 - 17,3 GHz
Channel size3,5 to 140 MHz
Asymmetric BandwidthYES
FECReed-Solomon, Interleaving
ACMYES
Frequency stability± 5 ppm
Transmitter
Output power TX-25 to +6 dBm (± 1 dB)*
APC (Autom. Power Control)YES
APCmin, APCmaxYES
Regulation APC by RSSIYES
* +4 dBm with modulation 256 QAM
* +6 dBm with modulation 4-128 QAM
Symmetric Bandwidth
Symmetric Bandwidth [MHz]ModulationCapacity
of radio [Mbps]
Sensitivity for
BER 10-6 [dBm]
Sensitivity for
BER 10-9 [dBm]
90256 QAM620-61-59
90128 QAM541-65-63
9064 QAM464-68-66
9032 QAM387-72-70
9016 QAM309-75-73
904 QAM154-79-77
Asymmetric Bandwidth
Asymmetric Bandwidth [MHz]ModulationCapacity of radio [Mbps]Sensitivity for BER 10-6 [dBm]Sensitivity for BER 10-9 [dBm]
140 / 40128 QAM843 / 240-63-61
140 / 4064 QAM722 / 206-66-64
140 / 4032 QAM602 / 171-70-68
140 / 4016 QAM481 / 137-73-71
140 / 404 QAM241 / 68-77-75
Antennas
TypeDiameter [cm]Gain [dBi]
ANT 17D35-C33533
ANT 17D65-C36538
ANT 17A90-C39040
ANT 17A120-C312042
User interface
Eth1,Eth22 x 10/100/1000 Base-T
SFP1, SFP22 x 1000Base-SX / 1000Base-LX
GUISMS (Windows, Linux-Wine)
WUISMS (Web browser, read-only)
MUISMS (Android, iOS)
Mechanical
Mechanical conceptFull Outdoor
Dimension145 mm x 240 mm x 240 mm
Weight3,5 kg
Power supply / cable
Power Over EthernetIEEE 802.3at (PoE+)
Separate DC power supply20-57 VDC
Power consumptionup to 35 W
Ethernet cable OutdoorFTP CAT5e to 100 m
Environmental
Operational temperature-20°C to 50°C
Ingress protectionIP-67
Compliance
IEEE 802.31000 Base-TX, 1000 Base-T
IEEE 802.3azEnergy Efficient Ethernet
IEEE 802.3xFlow Control
IEEE 802.1qVLAN tagging, QinQ
IEEE 802.3uAuto-Negotiation protocol
IEEE 802.3atPower Over Ethernet plus

Antennas

  • ANT 17D35-C3
    17,1 - 17,3 GHz
    Diameter 35 cm
    Gain 33 dBi
    Weight 2,5 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17D65-C3
    17,1 - 17,3 GHz
    Diameter 65 cm
    Gain 38 dBi
    Weight 9 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17A90-C3
    17,1 - 17,3 GHz
    Diameter 90 cm
    Gain 40 dBi
    Weight 20 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17A120-C3
    17,1 - 17,3 GHz
    Diameter 120 cm
    Gain 42 dBi
    Weight 35 kg
    Compliance ETSI EN 302 217 Class3

Video

Accessories

  • SET 1

    (for Eth1, Eth2, PWR)
    SET structure:
    1x output
    2x rubber seal

  • SET 2

    (for SFP1, SFP2)
    SET structure:
    1x output
    3x rubber seal

  • PLUG

    (for Eth1, Eth2, SFP1, SFP2, PWR)
    Plug structure:
    1x plug
    1x rubber "O" ring

We use cookies to personalize content and ads, provide social media functions and analyze our traffic. We share information about how you use our site with our social media, advertising and analytics partners. Show details.

Understand